 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BTA201 series B, E and ER Triacs logic level Rev. 02 -- 13 January 2006 Product data sheet 1. Product profile 1.1 General description Passivated, guaranteed commutation triacs in a plastic package. The `sensitive gate' E and ER series are intended for interfacing with low power drivers, including microcontrollers. The high commutation B series are designed to commutate the full RMS current at the maximum junction temperature without the aid of a snubber. 1.2 Features s Suitable for interfacing with low power drivers, including microcontrollers s Reverse pinning option (ER type) 1.3 Applications s Motor control s Solenoid drivers 1.4 Quick reference data s s s s s s ITSM 12.5 A VDRM 600 V (BTA201-600B) VDRM 600 V (BTA201-600E) VDRM 800 V (BTA201-800B) VDRM 800 V (BTA201-800E) VDRM 800 V (BTA201-800ER) s s s s s s IT(RMS) 1 A IGT 50 mA (BTA201-600B) IGT 10 mA (BTA201-600E) IGT 50 mA (BTA201-800B) IGT 10 mA (BTA201-800E) IGT 10 mA (BTA201-800ER) 2. Pinning information Table 1: Pin 1 2 3 1 2 3 Pinning Description main terminal 2 (T2) gate (G) main terminal 1 (T1) main terminal 1 (T1) gate (G) main terminal 2 (T2) 321 Simplified outline Symbol T2 sym051 B and E series T1 G ER series SOT54 (TO-92) Philips Semiconductors BTA201 series B, E and ER Triacs logic level 3. Ordering information Table 2: Ordering information Package Name BTA201-600B BTA201-600E BTA201-800B BTA201-800E BTA201-800ER TO-92 Description plastic single-ended leaded (through hole) package; 3 leads Version SOT54 Type number 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDRM Parameter repetitive peak off-state voltage BTA201-600B BTA201-600E BTA201-800B BTA201-800E BTA201-800ER IT(RMS) ITSM RMS on-state current non-repetitive peak on-state current full sine wave; Tlead 54.3 C; see Figure 4 and 5 full sine wave; Tj = 25 C prior to surge; see Figure 2 and 3 t = 20 ms t = 16.7 ms I2t dlT/dt IGM PGM PG(AV) Tstg Tj [1] [1] [1] Conditions Min - Max 600 600 800 800 800 1 Unit V V V V V A - 12.5 13.7 0.78 50 2 5 0.1 +150 125 A A A2s A/s A W W C C I2t for fusing t = 10 ms ITM = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/s rate of rise of on-state current peak gate current peak gate power average gate power storage temperature junction temperature over any 20 ms period -40 - Although not recommended, off-state voltages up to 800 V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 6 A/s. BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 2 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 1.5 Ptot (W) 003aaa954 35 Tlead (max) (C) = 180 120 1 90 60 30 65 0.5 95 0 0 0.2 0.4 0.6 0.8 1 IT(RMS) (A) 125 1.2 = conduction angle Fig 1. Total power dissipation as a function of RMS on-state current; maximum values 003aaa956 16 ITSM (A) 12 8 4 0 1 10 102 n 103 f = 50 Hz Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 3 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 103 ITSM (A) IT 003aaa955 ITSM t T Tj(init) = 25 C max 102 (1) 10 10-5 10-4 10-3 10-2 tp (s) 10-1 tp 20 ms (1) dIT/dt limit Fig 3. Non-repetitive peak on-state current as a function of pulse duration; maximum values 003aaa957 3 IT(RMS) (A) 003aaa958 1.2 IT(RMS) (A) 1 54.3 C 2 0.8 0.6 1 0.4 0.2 0 10-2 10-1 1 10 surge duration (s) 0 -50 0 50 150 100 Tlead (C) f = 50 Hz; Tlead 54.3 C Fig 4. RMS on-state current as a function of surge duration; maximum values Fig 5. RMS on-state current as a function of lead temperature; maximum values BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 4 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 5. Thermal characteristics Table 4: Symbol Rth(j-lead) Rth(j-a) Thermal characteristics Parameter Conditions Min Typ 150 Max 60 80 Unit K/W K/W K/W thermal resistance from junction to full cycle; see Figure 6 lead half cycle; see Figure 6 thermal resistance from junction to printed-circuit board ambient mounted; lead length = 4 mm 102 Zth(j-lead) (K/W) 10 (1) 003aaa961 1 (2) P 10-1 tp t 10-2 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 (1) Unidirectional (2) Bidirectional Fig 6. Transient thermal impedance as a function of pulse duration BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 5 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 6. Static characteristics Table 5: Static characteristics Tj = 25 C unless otherwise specified. Symbol Parameter Conditions BTA201-600B BTA201-800B Min IGT gate trigger current VD = 12 V; IT = 0.1 A; see Figure 8 T2+ G+ T2+ G- T2- G- IL latching current VD = 12 V; IGT = 0.1 A; see Figure 10 T2+ G+ T2+ G- T2- G- IH VT VGT holding current on-state voltage gate trigger voltage VD = 12 V; IGT = 0.1 A; see Figure 11 IT = 1.4 A; see Figure 9 VD = 12 V; IT = 0.1 A; see Figure 7 VD = 400 V; IT = 0.1 A; Tj = 125 C ID off-state current VD = VDRM(max); Tj = 125 C 0.2 1.2 0.7 0.3 0.1 30 50 30 30 1.5 1.5 0.5 0.2 1.2 0.7 0.3 0.1 12 20 12 12 1.5 1.5 0.5 mA mA mA mA V V V mA 50 50 50 10 10 10 mA mA mA Typ Max BTA201-600E BTA201-800E BTA201-800ER Min Typ Max Unit BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 6 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 7. Dynamic characteristics Table 6: Symbol Dynamic characteristics Parameter Conditions BTA201-600B BTA201-800B Min dVD/dt rate of rise of off-state voltage VDM = 67 % VDRM(max); Tj = 125 C; exponential waveform; gate open circuit VDM = 400 V; Tj = 125 C; dVcom/dt = 20 V/s; gate open circuit VDM = 400 V; Tj = 125 C; dVcom/dt = 10 V/s; gate open circuit tgt gate-controlled turn-on time ITM = 20 A; VD = VDRM(max); IG = 0.1 A; dIG/dt = 5 A/s 1000 Typ Max BTA201-600E BTA21-800E BTA201-800ER Min 200 Typ Max V/s Unit dIcom/dt rate of change of commutating current 12 - - 2.5 - - A/ms 16 - - 3.5 - - A/ms - 2 - - 2 - s 1.6 VGT(Tj) VGT(25C) 1.2 001aab101 3 IGT(Tj) IGT(25C) 2 (1) (2) (3) 003aaa959 0.8 1 (3) (2) (1) 0.4 -50 0 50 100 Tj (C) 150 0 -50 0 50 100 Tj (C) 150 (1) T2- G- (2) T2+ G- (3) T2+ G+ Fig 7. Normalized gate trigger voltage as a function of junction temperature Fig 8. Normalized gate trigger current as a function of junction temperature BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 7 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 2 IT (A) 1.6 003aaa960 3 IL(Tj) IL(25C) 2 001aab100 1.2 (1) (2) 0.8 (3) 1 0.4 0 0 0.4 0.8 1.2 1.6 2 VT (V) 0 -50 0 50 100 Tj (C) 150 Vo = 1.02 V; Rs = 0.358 (1) Tj = 125 C; typical values (2) Tj = 125 C; maximum values (3) Tj = 25 C; maximum values Fig 9. On-state current as a function of on-state voltage 3 IH(Tj) IH(25C) 2 001aab099 Fig 10. Normalized latching current as a function of junction temperature 003aaa962 104 dVD/dt (V/s) 103 (1) (2) 1 102 0 -50 0 50 100 Tj (C) 150 10 0 50 100 Tj C 150 Gate open circuit (1) BTA201 series B (2) BTA201 series E and ER Fig 11. Normalized holding current as a function of junction temperature Fig 12. Critical rate of rise of off-state voltage as a function of junction temperature; minimum values BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 8 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 8. Package outline Plastic single-ended leaded (through hole) package; 3 leads SOT54 c E d A L b 1 D 2 e1 e 3 b1 L1 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.55 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) max. 2.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 JEITA SC-43A EUROPEAN PROJECTION ISSUE DATE 04-06-28 04-11-16 Fig 13. Package outline SOT54 (TO-92) BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 9 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 9. Revision history Table 7: Revision history Release date 20060113 Data sheet status Product data sheet Change Doc. number notice Supersedes BTA201_SER_B_E_ER_1 Document ID BTA201_SER_B_E_ER_2 Modifications: * * * Figure 4: Figure note corrected Table 6 "Dynamic characteristics": Units corrected Figure 12: Figure title corrected Product data sheet 9397 750 15154 - BTA201_SER_B_E_ER_1 20050825 BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 10 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 10. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com BTA201_SER_B_E_ER_2 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 02 -- 13 January 2006 11 of 12 Philips Semiconductors BTA201 series B, E and ER Triacs logic level 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 (c) Koninklijke Philips Electronics N.V. 2006 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 13 January 2006 Document number: BTA201_SER_B_E_ER_2 Published in The Netherlands |
Price & Availability of BTA201-800B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |